If you need an electrician in Boerne, contact Texas Highlands Electric to request a quote. Share what you’re experiencing or what you want installed, and we’ll recommend the safest next step.
Service Areas
Electrician in Boerne, TX
Our shop is on Johns Road, so Boerne is home base for us. That means shorter drive times, easier scheduling, and a crew that already knows the area, from the older homes near Hauptstrasse to the newer builds going up around Esperanza and out toward Cordillera Ranch. We handle residential and light commercial electrical work across Boerne: repairs, lighting, panel and service upgrades, remodel wiring, and EV charger installation. When something keeps acting up, we find the actual cause instead of swapping parts and hoping.
Electrical Work We Do Around Boerne
Repairs and Troubleshooting
When a breaker won’t stay set, the lights dim every time the AC kicks on, or an outlet goes dead for no clear reason, the problem almost always traces back to a specific failure point: a loose connection, a tired breaker, an overloaded circuit, or a worn-out device. We put the circuit under real load, follow it back to the source, and repair the part that’s actually failing so the same complaint isn’t back next month.
Lighting, Fans, and Fixtures
Recessed lighting, interior fixtures, dimmers, ceiling fans, bath exhaust fans, and exterior or security lighting. We mount it correctly, wire it to the right controls, and confirm that dimmers and LEDs work together so nothing buzzes or flickers after we leave.
Panel and Service Upgrades
A panel starts holding a house back when it runs out of breaker space, the breakers stop holding, or you add load it was never sized for: a remodeled kitchen, a workshop, a heat pump, an EV charger. We handle breaker replacements, panel repairs, and full upgrades, and we only recommend a larger panel when the equipment condition or the load genuinely calls for it.
Remodel and New-Construction Wiring
Boerne has plenty of both remodels and new builds, and the electrical is where modern use either works or fights you. We handle circuit additions, dedicated appliance circuits, and full remodel wiring, planned around how the space will actually be used and laid out so it stays easy to service down the road.
Smart Controls and Home Automation
Smart switches, dimmers, and lighting controls only behave when the wiring and device compatibility are right. We install controls that work the first time and keep working, not the kind that need a reset every week.
EV Charger Installation (Level 2)
We install Level 2 chargers with a correctly sized circuit, the right breaker protection, and code-compliant wiring. We confirm your panel can carry the load first, so the charger runs at full speed without tripping anything.
Generator Installation
Outages happen out here, especially toward the edges of town and on acreage. We install the electrical side of standby and backup generator setups, with safe connections and proper transfer protection for the circuits you need to keep running.
Solar-Ready Electrical Work
When a solar project needs electrical support, we handle the wiring improvements and safe connections to code so the system has what it needs to tie in cleanly.
Commercial Electrical Services
Offices, shops, and small commercial spaces around Boerne: troubleshooting, repairs, lighting retrofits, and panel work, scheduled around your hours and finished clean.
Electrical Problems We See Most in Boerne
Older homes closer to downtown tend to show their age at the connections and the panel, while newer places on well water and acreage deal more with surges, long service runs, and added load. The warning signs are the same either way: breakers that trip on a pattern, lights that dim when something big starts up, outlets that quit, or anything warm to the touch at a switch or receptacle. Any of those is worth a look before it becomes a safety problem.
How Texas Highlands Electric Works
We start by confirming what the system is doing under normal use, then explain what we found and what the fix involves before any work begins. Everything goes in to code with proper circuit sizing, protection, and tight connections, and we keep the site clean. When we’re done, we test it and confirm the original problem is actually resolved, not just quiet for the moment. Since we’re based in Boerne, coming back out is easy if you ever need us again.
Questions Boerne Homeowners Ask
Are you actually based in Boerne?
Yes. Our shop is on Johns Road in Boerne, so most of our work is right here in town and across the surrounding Kendall County area.
Can you fix recurring breaker trips and dead outlets?
Yes. We troubleshoot breaker trips, flickering lights, dead outlets, warm switches, and intermittent power, then repair the failure point so it doesn’t keep returning.
Do you upgrade electrical panels?
Yes. We handle breaker replacements, panel repairs, and full panel upgrades when a panel is out of space, unsafe, or can’t support the load you’re adding.
Can you install a Level 2 EV charger at my house?
Yes. We size the circuit, confirm your panel has capacity, and install the charger with code-compliant wiring so it runs reliably.
Do you wire remodels and additions?
Yes. We handle remodel wiring, circuit additions, and dedicated circuits for kitchens, baths, garages, and additions.
How do I request a quote for electrical service in Boerne?
You can request a quote by calling (830) 431-4530 or by using the contact form on our website.
